Release 2.0 June 2012

Oldcastle supplies these hatching pattern files and drawing files free of charge to customers using AutoCAD.
 
Oldcastle accepts no responsibility for the use these files, or any damage or loss that may occur during installation or use of these files.

This installation replaces two files in AutoCAD installation and add drawing files (Paver Circles) in the Belgard folder under My Documents. The new files “acadiso.pat” and “acad.pat” will be copied onto your AutoCAD Support file: e.g.
C:\Users\login_name\AppData\Roaming\Autodesk\AutoCAD 2012\enu\Support

This installation program will install all the Oldcastle Hatch Patterns into your AutoCAD support folder detected automatically.  If you want to choose a different folder, select the Browse button to choose your support folder.

IMPORTANT

It is advisable to create back-up copies of your “acadiso.pat” and “acad.pat” files if you have customized them.

In addition, to use Oldcastle hatching patterns, you must use the AutoCAD BHATCH command. It is assumed that you are familiar with this command and can use it. Oldcastle hatching will come up after the classic AutoCAD hatching.

Note that hatching has been done in millimeter units and imperial units so the scale factor be 1 in drawings in inches or drawings in millimeters.

If at any time you have questions concerning installation, hatching or any other matter, do not hesitate to get in touch. Our contact information is as follows:

Technical support - hatching only:
(514) 990-1789

Sales:
877-Belgard

Web site:
http://www.belgarddesignpro.com/

The Oldcastle team wants you to take advantage of the multiple installation patterns for our pavers. We hope this new tool will enable you to offer your customers more choice.

To continue, follow the instructions for installation and use and go to the next window.

Best regards!

The Oldcastle Team