WPC4  
      2      B       P   Z             Courier 10cpi #| x              A~x 6X   @ 8 X@Canon BJ-200ex (LQ mode)             CB20LQMO.PRS x 
   @   ,hX@Courier 10cpi  2     V   @   Z          F   `    ? x x x h    Aox 6X   @ 8 X@Canon BJ-200ex (LQ mode)             CB20LQMO.PRS x 
   @   ,h  @#| x           2         2                                   ,               mSECTION 09688  PAGE ,    =      X`	hp x (#%'0*,.8135@8:<H?A                      `	@  `@  !#%`'                       I. A. 1. a.(1)(a) i) a)                 1 .1  A. 1. a) 1. 1                                                                           $ SECTION 09688

! CARPET - GLUE DOWN

   ?   PART                  1  `	`	 GENERAL(#`	

   ?                  1.1   SECTION INCLUDES(#

   ? @                   A.   Carpet placed with glue down method.(#

   ?                   B.   Accessories.(#

   ? `	               1.2   REFERENCES(#

   ? 
                   A.   ASTM D2859 - Test Method for Flammability of Finished TextileFloor Covering Materials.(#

   ? H                  B.   ASTM E84 - Surface Burning Characteristics of BuildingMaterials.(#

   ?                   C.   ASTM E648 - Critical Radiant Flux of Floor Covering SystemsUsing a Radiant Heat Energy Source.(#

   ?                1.3   SUBMITTALS(#

   ?                    A.   Submit under provisions of General Conditions.(#

   ?                   B.   Product Data:  Provide data on specified products, describingphysical and performance characteristics; sizes, patterns,colors available, and method of installation.(#

   ? 8                  C.   Samples:  Submit two samples 12 x 12 inch in sizeillustrating color and pattern for each carpet materialspecified.(#

   ? X                  D.   Manufacturer's Installation Instructions:  Indicate specialprocedures, perimeter conditions requiring special attention.(#
   ?                1.4   QUALIFICATIONS(#

   ? @                   A.   Manufacturer:  Company specializing in manufacturingspecified carpet with minimum three years documentedexperience.(#

   ? `"                  B.   Installer:  Company specializing in installing carpet withminimum three years experience and approved by manufacturer.(#

   ? $               1.5   REGULATORY REQUIREMENTS(#

   ? H&                   A.   Conform to applicable code for flame/smoke ratingrequirements.(#

   ? (                  B.   Conform to NFPA 253 for flooring radiant panel test.(#
   h)      =  0*0*0*  Ԍ   ?                     C.   Conform to ASTM D2859 for surface flammability ignition test.(#

   ?                1.6   ENVIRONMENTAL REQUIREMENTS(#

   ?                     A.   Store materials for 3 days prior to installation in area ofinstallation to achieve temperature stability.(#

   ? x                  B.   Maintain minimum 70 degrees F ambient temperature 3 daysprior to, during and 24 hours after installation.(#

   ?                1.7   MAINTENANCE DATA(#

   ? `	                   A.   Submit under provisions of General Conditions.(#

   ? 
                  B.   Maintenance Data:  Include maintenance procedures,recommended maintenance materials, and suggested schedule forcleaning.(#

   ?  PART               2  `	`	 PRODUCTS(#`	

   ?                  2.1   ACCEPTABLE MANUFACTURERS - CARPETING(#

   ? 0                   A.   Contractor shall identify existing carpeting and attempt tofurnish same manufacturer, grade and color as original.(#

   ?                2.2   ACCESSORIES(#

   ?                    A.   Sub-Floor Filler:  White premix latex; type recommended byadhesive material manufacturer.(#

   ? p                  B.   Adhesive:  Compatible with carpet material.(#

   ?   PART               3  `	`	 EXECUTION(#`	

   ?                  3.1   PREPARATION(#

   ?                     A.   Remove existing carpet.  Fill any minor or local low spots,cracks, joints, holes, and other defects with sub-floorfiller, as required after removing old carpet and glue.(#

   ? @                  B.   Apply, trowel, and float any needed filler to achieve smooth,flat, hard surface.  Prohibit traffic until filler is cured.(#

   ? !                  C.   Vacuum clean substrate.(#

   ? (#               3.2   INSTALLATION(#

   ? $                   A.   Apply carpet and adhesive in accordance with manufacturers'instructions.(#

   ? '                  B.   Verify carpet match before cutting to ensure minimalvariation between dye lots.(#   '        0*((@@  Ԍ   ?    ԙ                 C.   Double cut carpet, to allow intended seam and pattern match. Make cuts straight, true, and unfrayed.  Edge seam carpet atpublic areas.(#

   ?                    D.   Locate seams in area of least traffic.(#

   ?                   E.   Join seams by hot adhesive tape method.  Form seams straight,not overlapped or peaked, and free of gaps.(#

   ?                   F.   Lay carpet tight and flat on subfloor, well fastened atedges, with a uniform appearance.  Provide monolithic color,pattern, and texture match within any one area.(#

   ? (
                  G.   Do not change run of pile in any room where carpet iscontinuous through a wall opening into another room.  Locatechange of color or pattern between rooms under doorcenterline.(#

   ?                   H.   Cut and fit carpet around interruptions.(#

   ?                   I.   Bind cut edges where not concealed by edge strips.(#

   ? 0       	           J.   Fit carpet tight to intersection with vertical surfaceswithout gaps.(#

   ?        
           K.   Cut carpet tight to walls.  Fit carpet tight to verticalinterruptions, leaving no gaps.(#
* 
   ?                3.3   CLEANING(#

   ? p                   A.   Clean work under provisions of General Conditions.(#

   ?                    B.   Remove excess adhesive without damage, from floor, base, andwall surfaces.(#

   ? X                  C.   Clean and vacuum carpet surfaces.(#

# END OF SECTION
