WPC  
      2       B    V   P    Z             Courier 10cpi  ? x x x h    Aox 6X   @ 8 X@Canon BJ-200ex (LQ mode)             CB20LQMO.PRS x 
   @   ,h  @ #| x            2     W   C                  Standard Printer                     STANPRIN.PRS x 
   @           i
 #| x      ,               mSECTION 10160  PAGE ,    = 
     X`	hp x (#%'0*,.8135@8:<H?A                      `	@  `@  !#%`'                       I. A. 1. a.(1)(a) i) a)                 1 .1  A. 1. a) 1. 1                                                                           $ SECTION 10160

 METAL TOILET COMPARTMENTS

   ?  PART                  1  `	`	 GENERAL(#`	

   ? x                 1.1   SECTION INCLUDES(#

   ?                    A.   Metal toilet compartments, floor mounted.(#

   ?                1.2   REFERENCES(#

   ? (
                   A.   ANSI A117.1 - Safety Standards for the Handicapped.(#

   ?                   B.   ASTM A167 - Stainless and Heat Resisting Chromium-NickelSteel Plate, Sheet, and Strip.(#

   ?                   C.   ASTM A424 - Steel Sheet for Porcelain Enameling.(#

   ?                   D.   ASTM A526 - Steel Sheet, Zinc-Coated (Galvanized) by theHot-Dip Process, Commercial Quality.(#

   ?                   E.   FS RR-P-1352 - Partitions, Toilet, Complete.(#

   ?                1.3   SUBMITTALS(#

   ?                    A.   Submit under provisions of General Conditions.(#

   ?                   B.   Shop Drawings:  Indicate partition plan, elevation views,dimensions, details of wall, floor, and supports, doorswings.(#

   ?                   C.   Product Data:  Provide data on panel construction, hardware,and accessories.(#

   ?                    D.   Samples:  Submit two samples of partition panels, 12 x 12inch in size illustrating panel finish, color, and sheen.(#

   ? x                  E.   Manufacturer's Installation Instructions:  Indicate specialprocedures, perimeter conditions requiring special attention.(#
   ?                 1.4   REGULATORY REQUIREMENTS(#

   ? `"                   A.   Conform to ANSI A117.1 code for access for the handicapped.(#

   ? #               1.5   FIELD MEASUREMENTS(#

   ? %                   A.   Verify that field measurements are as indicated on shopdrawings.(#



   h)      =  0*0*0*  Ԍ   ?    ԙPART               2  `	`	 PRODUCTS(#`	

   ?                  2.1   ACCEPTABLE MANUFACTURERS(#

   ?                     A.   Match existing partitions in type and color.(#

   ?                2.2   MATERIALS(#

   ? @                   A.   Steel Sheet:  ASTM A424, Type I, commercial quality. (#

   ?                2.3   ACCESSORIES(#

   ? `	                   A.   Pilaster Shoe:  Match existing.(#

   ? 
                  B.   Head Rails:  Match existing.(#

   ?                   C.   Attachments, Screws, and Bolts:  Match existing.(#

   ?                   D.   Hardware:  Match existing.(#

   ?  PART               3  `	`	 EXECUTION(#`	

   ? 0                 3.1   INSTALLATION(#

   ?                    A.   Install partitions secure, rigid, plumb, and level inaccordance with manufacturer's instructions.(#

   ?                   B.   Maintain 3/8 to 1/2 inch space between wall and panels andbetween wall and end pilasters.(#

   ? p                  C.   Attached panel brackets securely to walls using anchordevices.(#

   ?                   D.   Attach panels and pilasters to brackets with tamper proofthrough bolts and nuts.  (#

   ?                 3.2   ERECTION TOLERANCES(#

   ?                    A.   Maximum Variation From True Position:  1/4 inch. (#

   ? @                  B.   Maximum Variation From Plumb:  1/8 inch. (#

   ?                 3.3   ADJUSTING(#

   ? `"                   A.   Adjust work under provisions of General Conditions. (#

   ? #                  B.   Adjust and align hardware to uniform clearance at verticaledge of  doors, not exceeding 3/16 inch.(#

   ? H&                  C.   Adjust adjacent components for consistency of line or plane.(#

# END OF SECTION   '         0*((@@  Ԍ