This screen provides selections in three areas:

• Select Sections -- The All Sections option will be chosen by default, and will include every Section contained in the Job. Clicking the Some Sections button will allow you to select only the Sections you want from the text box by clicking to select them. Highlightinga Division will automatically select all the Sections within that Division.  

• Printing and Renumbering -- Check the boxes to indicate if you want to generate the processed Sections and whether you want their content renumbered based on the editing that has been performed. The renumbering occurs only in the printed and processed (.prn) files, not in the Section (.sec) files. The .sec files retain the original numbering of the Sections. The paragraphs referenced in the reports will also reflect the renumbered paragraphs. (While editing, <SPT> tags renumber immediately, but the numbers within the <TTL> tags do not.)   

• Reconcile -- Check the boxes if you want to perform Address, Reference and Submittal reconciliation. These functions provide an automated system by which you can verify References, Organization names, and Submittals used in the Sections of your Job and remove those not used. Just as with renumbering, these changes are saved to the print and processed files, not the .sec Section files, which are left intact.  

• Process and Print -- applies the choices made on the tabbed screens and sends a copy to the selected printer

• Process Only -- applies the choices made on the tabbed screens and sends the results to the Processed Files folder under the Job in the SI Explorer.

• Save Settings -- will save the choices you make on the tabbed screens (but not the choice of Sections to be processed/printed) so that the next time the box is opened, the selections you saved will be your new defaults.

• Cancel -- will close the dialog box without executing any of the changes.

• Printer --drop-down box displays available printers.

• Setup -- opens the Print Setup dialog box to allow setting changes like duplex printing.

If you want to save some but not all the settings, make the ones you want to save first, use the Save Setting button, and then make the additional selections that you don't want to save. Example: You want to make permanent changes to the Headers and Footers, but you will want to select different reports the next time you process Sections. You would make the changes on the Header/Footer tab first, click the Save Settings button, then choose the Reports you want to run.)