SECTION 15010

BASIC MECHANICAL REQUIREMENTS

PART 1 GENERAL

SECTION INCLUDES

Basic Mechanical Requirements specifically applicable to Division 15 Sections, in addition to Division 1 - General Requirements.

WORK BY OWNER

The Owner [has awarded] [will award] [a contract] [contracts] which [will commence] [commences] on [____________________]. Specifically this work [will include] [includes]:

Refrigerated Coolers: Supply and installation of compressor/condenser units, integral controls, heat recovery refrigerant diverting valves.

[[____________________:] [_______________].]

OWNER FURNISHED PRODUCTS

Products furnished to the site and paid for by Owner:

Centrifugal chillers.

[____________________.]

WORK SEQUENCE

Install work in [stages] [phases] [to accommodate Owner's occupancy requirements] [_______________] during the construction period coordinate mechanical schedule and operations with [Owner] [Architect/Engineer]:

[Stage] [Phase] 1: [____________________.]

[Stage] [Phase] 2: [____________________.]

FUTURE WORK

Provide for future work under requirements of Section 01010.

Project is designed for future expansion of [__________] system [as specified] [and] [as indicated].

[___________________________________________________.]

ALLOWANCES

Cash Allowance: Refer to Section 01019 for allowance sum applicable to Work.

Allowance includes [purchase and delivery of [________].] Installation is included in Section [_____] and is part of the Contract Sum/Price.] [purchase, delivery, and installation of [__________].]

UNIT PRICES

Section [_____-__________]: Unit price for [purchase] [delivery] [and] [,] [installation] of [100] [_____] fire dampers.

Section [_____-__________]: Unit price for [purchase] [delivery] [and] [,] [installation] of [_____] sq ft ([_____] sq m) of [duct] [pipe] insulation.

ALTERNATES

Alternates quoted on Bid Forms will be reviewed and accepted or rejected at the Owner's option. Accepted Alternates will be identified in Owner-Contractor Agreement.

Coordinate related work and modify surrounding work as required.

Schedule of Alternates:

Alternate No. [_____]:

Base Bid Item: Provide [____________________] under the provisions of Section [_____], as indicated on Drawing [_____.]

Alternate Work: Provide [____________________] under the provisions of Section [_____], as indicated on Drawing [_____.]

REFERENCES

[__________-__________________________.]

SUBMITTALS

Submit under provisions of Section 01300.

proposed Products List: Include Products specified in the following Sections:

Section [_____-_______________.]

Section [_____-_______________.]

Section [_____-_______________.]

Submit shop drawings and product data grouped to include complete submittals of related systems, products, and accessories in a single submittal.

Mark dimensions and values in units to match those specified.

REGULATORY REQUIREMENTS

Conform to [applicable] [____________________] Building Code for [____________________.]

Fire Protection: Conform to [____________________.]

Plumbing: Conform to [___________________________.]

Obtain permits, and request inspections from [authority having jurisdiction.] [___________________________.]

PROJECT/SITE CONDITIONS

Install Work in locations shown on Drawings, unless prevented by Project conditions.

Prepare drawings showing proposed rearrangement of Work to meet Project conditions, including changes to Work specified in other Sections. Obtain permission of [Owner] [Architect/Engineer] before proceeding.

SEQUENCING AND SCHEDULING

Construct Work in sequence under provisions of Section 01010.

[________________________________________.]

[________________________________________.]

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Not Used

END OF SECTION